SCIENCE BODYBOARDS Pro Team Spec Tri Quad Vent Polypro Core – 2023 Model

Science Bodyboards Pro Team Spec Tri Quad Concave Polypro Core Bodyboard 2023 Model

Designed by Mike Stewart, arguably the most respected and well known wave rider of all time, is the man behind Science Bodyboards.
With over 30 years experience riding the best waves on the planet you can be sure you’re getting the best board possible when you ride a Science Board.

Designed to ride amazing in any conditions, the Pro’s shape is super fast with enough curve to control that speed for destroying sections & blasting airs on any wave you see fit.
This board is designed with a thinner core allowing more flex & control right out of the wrapper.
Designed by Science team riders, thius is as close as you’ll get to what the Pro’s ride.

FEATURES
TEMPLATE: Pro
CORE: Polypro (PP) Core
Polypro Core is a state of the art engineered bodyboard core. A lightweight core that is fusion formed to create a nucleus that delivers incredible flexural properties,
including instant recoil, added projection, enhanced longitudinal stiffness & awesome compression strength. 100% waterproof.
STRINGER: 1 x RCS Stringer
DECK: WaveCushion Air 8lb PE Deck
RAILS: 55/45 Double Rails
TAIL: Tri Scallop Tail with Tail Piece

SLICK: Surlyn Slick by DuPont with Slick Mesh
ADDITIONAL FEATURES: Full Deck Contour, Quad Vent Channels, Nose Bulbs, Tail Piece, Screened Deck/ Slick Print, Pro Deck Heat Stamp

Tech: Tri Quad Vent Concave
The New Tri / Quad Channel Tail combo is a on or off Channel System. It engages when you need it and has a normal ride in cruise mode.The Four Channels are narrow and deep with a flat section in centre to help give you a bit more release when you need it. Push hard on your rail and the quads rip in with hold and drive and combined with the Tri Crescent hooks in the First and Fourth Channel this allows you to turn sharper and still keep the hold and drive your after.

PRO TEAM SPEC FLEX FACTOR – F5

SCIENCE BODYBOARD FLEX FACTOR RATING

You may have noticed your equipment works differently depending on the temperature. The way a board flexes and recoils in warm conditions is different than in the cold.

Your personal preference for what you consider as optimum flex is unique to where you live and what your local temperatures are. To take the guess work out of which of our boards is softer (generally better for colder conditions) or stiffer (generally better for warmer conditions) and to help you dial in flex we have created the Science Flex Factor. F1 being the stiffest composition we make and F10 being the softest.

If the board indicates a F+ then an ISS Stringer is in place (e.g. F3+) the flex rating becomes a +or- depending on the ISS Stringer being used.

– Science Flex Factor System is only relative to the Science Bodyboard Range and should not be compared to any other Brands.

COLOURWAYS
Black Deck// Black Pinline// Black Rails// Turquoise Slick 
Tangerine Deck// Blue Pinline//Midnight Blue Rails// Pink Slick 
 

Here’s Mike explaining Science’s Flex factor